Essilor Medica 700, User Manual

Page: 39 / 216

33
Wave Analyzer Medica 700 User Guide
33
Overview of the Software
No Description
1 Erase
To erase individual rings in the topo map image select "Erase". A list of ring
positions opens. Select the position of the ring you would like to erase, and then
move the cursor over it, and only ring in the selected position will be erased.
Note, the outer rings are in higher positions, from position 24 and downwards,
while the inner ring is position 1.
Note: If you erase more than 10% of the topography rings, you may reduce
the accuracy of the results.
2 Add
Select the position number of the ring (shown in blue), then trace the ring in that
position, the device "draws" a new ring. Note, rings can only be drawn if the topo
image is relatively clear.
3 Auto
Allows deleting rings by touching the screen. This is the default mode.
4 Undo
Undo the modifications
5 Retake
Retakes the measurement
6 Continue
Validates the modifications that were done and computes the topography map
Editing the Ringer
If you select ADD or ERASE from the menu above, the following screen appears: