Essilor Medica 700, User Manual

Page: 156 / 216

Wave Analyzer Medica 700 User Guide
150
Configuring the Unit
No Description
1 Beep
Select the volume of the beep sounds that the unit emits during the
measurements.
Measurement Default Settings
WF Measurements: Displays the default number of times the Wave Front test
should be repeated. Select the
and buttons to change this value.
Tono Measurements: Displays the default number of times the Tonometry test
should be repeated. Select the
and buttons to change this value.
2 Target Luminosity
Select the luminosity level of the fixation target.Topo with Ringer
Display the topography results with the Ringer option after the measurment is done
and before the results are displayed.
3 Position
Select whether the default position of the head rest and chin rest should be
appropriate for adults or for children.
4 Reading Distance
Set the reading distance for the near measurement, from 30-70cm.
5 Add Measurement with WF
Select to add Near Vision in the Wave Front test. Select the and to change
the default distance for near vision testing. Note: this will add Near Vision testing to
every wavefront test.
Tono Measurements
Allows you to modify the number of Tono measurements.
6 WF Measurements
Select the number of wavefront measurements for each wavefront exam. Only
measurements that include wavefront will be effected.
7 Tono Measurements
Tono Measurements: Displays the default number of times the Tonometry test
should be repeated. Select the
and buttons to change this value. Only
examinations that include tono will be effected.
8 Tono Automation
Two types of focusing are available for the tonometer, Auto and Semi . By default,
the tono measurement is in Auto focusing mode, where the device can take a
measurement with little intervention by the examiner. In Semi mode, the tonometer
remains at the centering point found in the pachymeter measurement and all of the
focusing is done by the examiner.
9 Topo with Ringer
By default the ringer is available for editing. To remove the ringer display shown
immediately after topo measurements, unselect this checkbox.