Essilor Medica 700 User Manual Download

Page: 174 / 216

Wave Analyzer Medica 700 User Guide

168

Configuring the Unit

1. Exporting just the missing measurements

2. Exporting the entire database.

Please note, option #2 will take a while and may slow down the device. Therefore, we
recommend these steps are done while the device is idle.

To export data retroactively, click on the

Rebuild Remote Access Data

button and the

following screen appears:

Description

Cancel

Cancels selection

Once selected, only missing data will be added to the remote access site. Any data
already saved in the Remote Access site, will remain.

Yes

This option will save the entire database in the Remote Access site, new data and
as well as previously existing data.

Note: Remote access (from intranet) allows viewing images only; data modification,
such as replacing data, deleting data, and making other changes are not possible via
remote access.

Summary of Contents for Medica 700
























































































































































































































Search results

Summary of Contents for Medica 700

Reviews:

Related manuals for Medica 700

Brands by name

Popular brands

Essilor Medica 700, User Manual

Search results

Summary of Contents for Medica 700

Reviews:

Related manuals for Medica 700

Brands by name

Popular brands