Essilor Medica 700 User Manual Download Page 33

Page: 33 / 216

Wave Analyzer Medica 700 User Guide

Overview of the Software

Description

Parameters

Open a dialog box in which you can change the number of times WF and Tono
teststest will be performed during this diagnostic.

Note:

If the WF and Tono tests are not included in this diagnostic, changing the

values in the dialog box will have no effect.

Cancel

Cancel the measurement procedure and return to the previous screen.

Begin the diagnostic test.

Down arrow

Lower the unit's head so that it aligns better with the patient's eyes.

Right arrow

Move the unit's head to the right so that it aligns better with the patient's eyes.

Measures to be performed

Indicates which measurement procedures will be performed for the diagnostic
selected in the Diagnostics list (

Summary of Contents for Medica 700
























































































































































































































Search results

Summary of Contents for Medica 700

Reviews:

Related manuals for Medica 700

Brands by name

Popular brands

Essilor Medica 700, User Manual

Search results

Summary of Contents for Medica 700

Reviews:

Related manuals for Medica 700

Brands by name

Popular brands