All rights reserved. Reproduction as well as electronic duplication of this guide, complete or in part, requires the written consent of ESERA-
Automation or E-Service GmbH. Errors and technical modification subject to change.
©
ESERA-Automation, E-Service GmbH 2019
www.esera.de
Programming Manual Controller-Gateway-Station V1.0 R1.1
Page 63 of 77
21.
Functional enhancements and options
Various function extensions are planned or available for the 1-Wire Controller / 1-Wire Gateway, which are only
activated by entering a function key. Each function key is only valid for one 1-Wire Controller / 1-Wire Gateway
and cannot be transferred to other 1-Wire Controllers / 1-Wire Gateways.
After entry, the function keys are permanently stored in the 1-Wire Controller / 1-Wire Gateway and will not be
overwritten by updates.
After 3 incorrect entries of a function key, the 1-Wire Controller / 1-Wire Gateway disables any function key entry
for approx. 10 minutes.
The function extensions are supported from the 1-Wire Controller / 1-Wire Gateway firmware version V1.18_x
onwards.
Function keys are available for purchase in the ESERA Online Shop.
The following functional enhancements are currently available or in the planning stage:
Functional enhancement Function
Details
2
Codesys Library
With this option the use of the Codesys
Library for e.g. WAGO® can be enabled.
Enter the function key as follows:
Command: SET,SYS,LIZ,functional enhancement,function key
Function keys that have already been released can be read with the following command:
Command:
GET,SYS,LIZ,Function number
List of all function keys by using
command: GET,SYS,LIZ,100
21.1.
Registry of 1-Wire Controller / 1-Wire Gateway
There are two ways to activate function enhancements (extensions). Before each activation a registration of the
1-Wire Controller / 1-Wire Gateway is necessary.
Screen shot of input page: function key Config-Tool 3.
b.
a.
a. Enter data incl. e-mail. Now the 1-
Wire Controller / 1-Wire Gateway will
be registered at the ESERA
– Server
Only when registry is finished function
enhancements will be possible.
b. Registration is also required for
sending a support e-mail directly from
Config-Tool 3 to the ESERA support-
team.
