All rights reserved. Reproduction as well as electronic duplication of this guide, complete or in part, requires the written consent of ESERA-
Automation or E-Service GmbH. Errors and technical modification subject to change.
©
ESERA-Automation, E-Service GmbH 2019
www.esera.de
Programming Manual Controller-Gateway-Station V1.0 R1.1
Page 49 of 77
16.
Data output to ESERA-Automation modules
If you are using a 1-Wire module from ESERA-Automation, you can assign the article number for this module and
the module data will be adjusted accordingly. If, for example, you have a multisensor (temperature-humidity) with
Art. No. 11134 in use, enter the article number and immediately receive the data for temperature, humidity, dew
point and brightness. If you divide the values by 100, you will receive data with two decimal places.
16.1.
Temperature-Humidity sensor, Art. No. 11102, 11113, 11120
The following data formats are output for the ESERA-Automation modules. If you divide the value by 100, you
receive the data with two decimal places.
Data output:
1_OWD1_1|2008
=> Controller No._module No. data record|temperature (°C) example: 20,08 °C
1_OWD1_2|511
=> Controller No._module No. data record|voltage VCC (V)
1_OWD1_3|4300
=> Controller No._module No. data record|humidity (rF) example 43,0%
1_OWD1_4|1200
=> Controller No._module No. data record|dew point (°C) example: 12,00 °C
16.2.
Temperature-Humidity-Brightness sensor Art. No. 11121, 11132, 11134, 11135
The following data formats are output for the ESERA-Automation modules. If you divide the value by 100, you
receive the data with two decimal places.
Data output:
1_OWD1_1|2008
=> Controller No._module No. data record |temperature (°C) example: 20,08 °C
1_OWD1_2|511
=> Controller No._module No. data record |voltage VCC (V)
1_OWD1_3|4300
=> Controller No._module No. data record |humidity (rF) example 43,0%
1_OWD1_4|1200
=> Controller No._module No. data record |dew point (°C) example: 12,00 °C
1_OWD1_5|80000
=> Controller No._module No. data record |brightness (Lux) example: 800,00 Lux
16.3.
Temperature-Humidity PRO Multisensor, Art. No. 11150
The following data formats are output for ESERA-Automation multisensor Pro. If you divide the value by 100, you
receive the data with two decimal places.
Data output:
1_OWD1_1|2008
=> Controller No._module No. data record |temperature (°C) example: 20,08 °C
1_OWD1_2|511
=> Controller No._module No. data record |voltage VCC (V)
1_OWD1_3|4300
=> Controller No._module No. data record |humidity (rF) example 43,0%
1_OWD1_4|1200
=> Controller No._module No. data record |dew point (°C) example: 12,00 °C
16.4.
Temperature-Humidity-Air Quality sensor, Art. No. 11110 und 11127
The following data is output for the ESERA-Automation air quality sensor 11110 and 11127. If you divide the
value by 100, you receive the data with two decimal places.
Data output:
1_OWD1_1|2008
=> Controller No._module No. data record |temperature (°C) example: 20,08 °C
1_OWD1_2|511
=> Controller No._module No. data record |voltage VCC (V)
1_OWD1_3|4300
=> Controller No._module No. data record |humidity (rF) example 43,0%
1_OWD1_4|1200
=> Controller No._module No. data record |dew point (°C) example: 12,00 °C
1_OWD1_5|50000
=> Controller No._module No. data record |air quality (ppm CO2) example: 500ppm
16.5.
Temperature-Humidity PRO multisensor, Art. No. 11151, 11152
The following data formats are output for ESERA-Automation multisensor Pro. If you divide the value by 100, you
receive the data with two decimal places.
Data output:
1_OWD1_1|2008
=> Controller No._module No. data record |temperature (°C) example: 20,08 °C
1_OWD1_2|511
=> Controller No._module No. data record |voltage VCC (V)
1_OWD1_3|850
=> Controller No._module No. data record |humidity (rF) example 85,0%
1_OWD1_4|1200
=> Controller No._module No. data record |dew point (°C) example: 12,00 °C
1_OWD1_4|50000
=> Controller No._module No. data record |air quality (ppm CO2) example: 500ppm
