330-Anexos.fm - 29/4/21
56
Installation guide
ANNEXES
1
MAINTENANCE
A u t o m a t i c d o o r i n s t a l l a t i o n s r e q u i r e r e g u l a r
m a i n t e n a n c e , w i t h r e g u l a r i t y d e t e r m i n e d b y
environmental conditions and traffic density.
•
Check that all the fastening screws are tight.
•
Clean and lubricate all sliding and moving
components.
•
Examine the cable connections.
•
Check that the arm's fastening screw is tight.
•
Check that the leaf is stable and that the movement
is fluid and frictionless from "door open" position to
"door closed" position.
•
Check that the speed, times and safety functions are
selected correctly.
•
Check that the activation sensors and safety sensors
work correctly.
•
In the absence of power, check that the door closes
again with the spring at controlled speed without
any danger.
Remove the main power line before starting
operations on the operator.
Any component that is damaged or worn must
be replaced! Use only original spare parts. First
check ERREKA's catalogue.
2
WARRANTY
ERREKA PUERTAS AUTOMATICAS declares, under its
sole responsibility, that the products supplied have a
warranty lasting 12 months from the date of purchase
(Work Delivery Protocol Date). This warranty applies to
any manufacturing defect and will include the cost of
transporting the material to the closest certified
technical service.
The installer is responsible for delivering the equipment
to the technical service.
This warranty does not include:
•
Damage caused by incorrect installation or use of
the equipment.
•
Damage caused by handling by unauthorised
personnel.
•
Damage caused by external or atmospheric agents
(lightning, floods, etc.).
