330-I
nstal_Electr
sw113.fm -
29/4
/21
Automatic swing door PREMIS 200
33
INSTALLATION - ELECTRICAL
Emergency
Two parameters must be specified when configuring
the emergency input:
1 Configuration:
• NO Impulse: occasional signal normally Open
• NC Impulse: occasional signal normally Closed
• NO Continuous: continuous signal normally Open
• NC Continuous: continuous signal normally Closed
• Disabled
2 Mode
:
• Door open
• Door Closed
• Manual
Digital selector (DIG SEL02) / Rotary selector (ROT SEL01)
Install the Digital selector or Rotary selector according
to the following connections diagram.
Side switch
Connect the side switch cables according to the
following wiring diagram.
When configuring the side switch, the function of
the programmable mode must be specified (see
illustration in section “Operator side switch and side
reset button” on page 11):
• Door Open
• Door Closed
To use the switch as a mode selector,
programmable inputs 3 and 4 must be
configured with the Disabled option.
Connections diagram
EMERGENCY
Connections
diagram
Connections diagram
