GENERAL SAFETY INSTRUCTIONS
Automatic swing door PREMIS 200
5
INSTALLATION WARNINGS
WARNING
: Important safety instructions.
Follow all instructions because improper
installation may entail the risk of serious injury.
The weight of this device is less than 20Kg and
therefore, it is not necessary to use handling
devices.
The necessary installation components are
indicated in the section "Elements of the
complete installation". The details and
instructions of all the components are
available on the web www.erreka.com.
Before installing the device, verify that the
door is in good mechanical condition, that it is
correctly balanced and that it opens and closes
correctly.
The operator is intended to be installed at a
height bellow 3 m above ground level or
another level of access.
Ensure that entrapment between the driven
part and the surrounding fixed parts is
prevented due to the opening movement of
the driven part except in the LOW ENERGY
mode.
In FULL ENERGY operation, safety sensors
must be installed in order to comply with
Standard EN 16005.
I n L O W E N E R G Y o p e r a t i o n , i t i s n o t
mandatory to use safety sensors as long as it is
not used by children and the elderly. It is
advisable to protect the area of the hinges to
avoid entrapment.
The details for the installation of the device are
indicated in the "Installation" chapter of this
manual. If you install protective devices not
supplied with this device, refer to the
instructions for those components.
Details on how to regulate the controls are
indicated in the section "Installation - Door
Configuration" of this manual.
After installation, make sure that the
mechanism is properly regulated and that the
protection system and any manual release
devices work correctly.
The list of all the components included in the
device is indicated in the section "Unpacking
and contents" of this manual.
The specification of the type of door, gate or
window for which the appliance is intended,
size and mass of the activated part and
required torque are indicated in the "Operator
characteristics" section.
The position or positions the device can be
installed in can be seen in the "Operator
Installation" section of this guide.
WARNINGS FOR THE DISPOSAL
When this product reaches the end of its
useful life, it must be dismantled by qualified
personnel.
This product is made up of diverse materials,
some can be recycled and others must be
disposed of. It is necessary to find out about
the recycling and disposal systems provided by
the local regulations in force.
Some parts of this product may contain
polluting or hazardous substances that, if
released to the environment, could damage it
and human health.
It is forbidden to dispose of this
device together with household
waste. Carry out selective collection
according to local regulations.
