330-I
nstalacion
sw113.fm -
29/4/21
Automatic swing door PREMIS 200
25
INSTALLATION
10
CABLES - COVER
Cables
Due to the compact design of the operator, the internal
wiring of the operator must be done in an orderly
manner to avoid problems putting the cover on.
Try to pass the cables through zone 1. If necessary, they
can also be passed through zone 2.
Take care when installing cables in spaces with
little room.
Once ordered, securing the cables to the reduction
unit using the cable gland.
Exterior cover
Once the cables are in place in accordance with the
section above, position the cover. Fasten the cover to
the gearbox with two screws.
Finally, fit the plastic decorative pieces.
