Era Replica Automobiles 427 ROADSTER, Assembly And Service Manual

Page: 88 / 165

SECTION E -BODY PREPARATION-
88
EXHAUST HEAT SHIELDS
E.R.A. offers a set of heat shields that help to contain heat
of the primary exhaust pipes where they are close to the
foot-boxes. They can be fit before the engine is in place
and are easily removed for primary pipe installation.
LEFT SIDE INSTALLATION
Right and left pieces are marked L and R!
d\htshld2
Hold the vertical shield against the bottom of the tube at
the front of the footbox.

Left: the inner edge about 1 /
2
" from the main frame
rail.

Right: the inner edge about 2" from the frame rail.
Mark and drill for the Tek

screws supplied.Attach the
top to the vertical shield. Mark and drill the wheel-house
for the sheet metal screws provided.
RIGHT SIDE INSTALLATION
These shields are only used when the battery is moved to
the rear.
Install like the left side.