Era Replica Automobiles 427 ROADSTER, Assembly And Service Manual

Page: 23 / 165

SECTION A -PARTS NEEDED-
23
Bell-housing FE (390/427/428): Lakewood 15210 for.
Ford small block:
Lakewood 15200: Top-loader, Richmond Gear, TKO with
short input shaft
Lakewood 15202: Tremec (May need spacer . See page 14)
Lakewood 15203: T-5
See mod's necessary on page 35.
Various, E.R.A.
Clutch arm pivot , FE Ford C8AZ-7522B (Small spline T.L. part must be custom
Dealer, E.R.A.
Clutch throwout bearing (Used with fork, not concentric throwout system)
Toploader small spline,
Tremec (all), Richmond Gear
Federal Mogul 614038
Toploader Big Spline Ram 486, Weber 16042
Cables, Battery, Front
Mount
Engine ground to battery 16" long, eye/terminal clamp
E.R.A., parts supplier
Battery to starter solenoid 32" long, eye/terminal clamp
Starter solenoid to starter 24" long, eye/eye
Rear Battery Cables
Engine/Trans ground
Battery ground
Battery to starter solenoid
With cutoff switch
Battery to switch
Switch to starter solenoid
Cooling system
See “Radiator Hoses” on page 25
Dampers, Springs, Front
Coil Spring 12" x 250 lbs/in (For Spax)
E.R.A., AFFCO,
Eibach
Damper Spax G135 PAS 200
E.R.A.
Koni 8212-1126SPA1 (Double external damping adjustment
w/aluminum body)
Special order only
Dampers, Springs, Jag rear
Coil Spring
with ht. adjst Spax
10" x 350 lbs/in
8" x 350 lbs/in
E.R.A., AFFCO,
Eibach
Damper, w/o ht adjst
w/ height adjustment Spax S200/415 (Externally adjustable damping)
Spax G640 S200 E.R.A.(Std XKE
Ser.2)
ERA rear
Coil spring
Damper, w/height adj
9” x 500-550 lbs/in (Must be 2.25” ID)
Spax G297
Drive Shaft Components
(see page 50 for parts reference)