Epson WorkForce Pro WF-C579R, User Manual

Page: 213 / 437

213
9. Click the Permissions button and select the following on the Share Permissions tab:
• Select Everyone under Group or user names.
• Select the checkbox in the Allow column for the Change setting.
10. Click OK to save the settings, then click OK again to close the Advanced Sharing window.
11. Select the Security tab and check that the Group or user names list at the top includes the current
computer user and the administrators who can now access the folder.
12. Select the Sharing tab again and write down the Network Path listed under Network File and Folder
Sharing at the top. This is the path you will register to your product contacts list so you can select it
for network scanning.
13. Click OK or Close .
Now you can register the folder path to your product contacts list.
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Registering Contacts for Network Folder or FTP Scanning - Web Config
You can register a list of contacts for scanning to a network folder or FTP server using Web Config and
your computer's internet browser.
Before you begin, print a network status sheet and locate the IP address for your product on the sheet.
Note: These instructions use Internet Explorer as an example browser.
1. Start Internet Explorer on a computer that is using the same network as your product.
2. Type your product's IP address into the address bar and press Enter .
3. Click Continue to this website (not recommended) .
4. Click Contacts .
5. Select the number you want to use for the contact you are adding and click Edit .
6. Select Network Folder (SMB) or FTP as the Type setting.
7. Enter the following information for the contact:
• Name : The name to display in your product's contact list.
• Index Word : Enter a word to identify this entry when searching for it (up to 30 characters). This
field is optional.
• Assign to Frequent Use : If you want to identify the contact as a frequently used address, select
On . This makes it quicker to select the contact when you scan.