Maintenance 17. Felt Sheet
VT Rev.1
229
17.2 Replacing Joint #3 Felt Sheet
Name
Quantity
Note
Maintenance
parts
Felt Sheet
1
1755084
Joint #3
Felt Sheet
Removal
(1) Turn OFF the Manipulator.
(2) Remove the Arm #2 Cover.
Reference:
Maintenance 7.2 Arm #2 Cover
(2) Remove Joint #3 felt sheet from the Arm #2.
Hold a slit on the one side of felt sheet to remove the
sheet from the outside of the Joint #3.
Joint #3
Felt Sheet
Joint #3
Felt Sheet
Installation
(1) Hold a slit on the one side of the Joint #3 felt sheet to remove the sheet from the
outside of the Joint #3.
One side of the felt sheet is a seal. Attach the felt sheet so that it fits in the groove of
the Joint #3 of Arm #2.
(2) Mount the Arm #2 Cover.
Reference:
Maintenance 7.2 Arm #2 Cover
Summary of Contents for VT Series
