Epson SureColor S40600 User Manual Download Page 147

Page: 147 / 170

147

Pull the media to the cutter groove and cut off the torn or creased media from the roll.

Manually rewind the media.

Remove any media that remains inside the product.

Turn the product back on, load media, run a nozzle check and, if necessary, clean the print heads.

Caution:

Do not leave the product turned off with the print heads in an uncapped position for an

extended period. The print heads may dry out and the product may not print properly.

Parent topic:

Solving Printing Problems

Related concepts

Print Head Maintenance

Related references

Media Setup Menu Settings

Related tasks

Loading Media
Replacing the Media Edge Plates

Related topics

Removing Printed Media

Summary of Contents for SureColor S40600











































































































































































Search results

Summary of Contents for SureColor S40600

Reviews:

Related manuals for SureColor S40600

Brands by name

Popular brands

Epson SureColor S40600, User Manual

Search results

Summary of Contents for SureColor S40600

Reviews:

Related manuals for SureColor S40600

Brands by name

Popular brands