121
Cleaning the Print Head Nozzles
Parent topic:
Maintenance
Checking for Clogged Print Head Nozzles
To maintain optimum print quality, perform a nozzle check before printing. This lets you visually inspect
the printed check pattern and clean the nozzles, if necessary. There are two ways to check the nozzles:
• Set up the product to automatically print a check pattern. You can select how often the product
performs a nozzle check in the Printer Setup menu.
• Manually run a nozzle check from the product control panel, as described here.
1.
Press the
maintenance button.
You see the Maintenance menu on the product LCD screen.
2.
Select
Nozzle Check
, select the print position for the check pattern, and press the
OK
button.
The product prints a nozzle check pattern.
3.
Check the printed pattern to see if there are gaps in the lines.
Nozzles are clean
Nozzles need cleaning
4.
If there are no gaps, the print head is clean and you can continue printing.
If there are gaps or the pattern is faint, clean the print head.
Parent topic:
Print Head Maintenance
Summary of Contents for SureColor S40600
