Epson SureColor S40600 User Manual Download Page 120

Page: 120 / 170

120

10. Grasp the tabs on the media edge plates and slide them to the left and right edges of the platen.

Release the tabs when they are in position.

11. Close the left maintenance cover and the front cover.

12. Plug in the power cords and turn the product back on.

Parent topic:

Maintenance

Related references

Consumables and Replacement Parts
Maintenance Precautions

Related topics

Removing Printed Media

Print Head Maintenance

Print head maintenance ensures the best print quality.

Perform the following maintenance as necessary:

•

Nozzle Check

: Check for clogged nozzles before each print job or if you have not used the printer for

an extended period of time. Inspect the printed check pattern and clean the print head if you notice
faint or missing areas.

•

Head Cleaning

: Clean the print head if you notice faint areas or gaps in the printed result.

Checking for Clogged Print Head Nozzles

Summary of Contents for SureColor S40600











































































































































































Search results

Summary of Contents for SureColor S40600

Reviews:

Related manuals for SureColor S40600

Brands by name

Popular brands

Epson SureColor S40600, User Manual

Search results

Summary of Contents for SureColor S40600

Reviews:

Related manuals for SureColor S40600

Brands by name

Popular brands