22
• After printing, do not touch, rub, or scratch the printed surface to avoid removing the ink.
• Dry printed media completely before folding or stacking it, or the printed surface may be damaged.
• Keep printed media out of direct sunlight.
• Display and store printed media as instructed in the media documentation.
• When you are not printing on media, remove it from the printer and place it in its original packaging to
prevent deterioration.
Parent topic:
Printer Usage Guidelines
Related topics
Removing Printed Media
Storing Your Printer
Follow these guidelines if you need to store your printer for a long period:
• If the printer is not going to be used for an extended period of time with the power off, wash the print
heads with cleaning cartridges (not included) and perform pre-storage maintenance. If you are unable
to wash the print heads with cleaning cartridges and perform pre-storage maintenance, turn on the
printer at least once every seven days to automatically clean the print head and prevent the nozzles
from clogging.
• Remove any loaded media before storing the printer to prevent the pressure rollers from causing
creases in the media, which may cause jams or damage to the print head.
• Make sure that the print head is in the home position before storing the printer. If it is left away from the
home position for a long time, the print quality may decline.
• Close all the covers on the printer to prevent dust and debris from getting in. If the printer will be not be
used for an extended period of time, protect it with an anti-static cloth or other cover. The print head
nozzles can become clogged if fine dust gets on the print head, and you may not be able to print
properly.
• Store the printer on a level surface; do not store it on angle, on its end, or upside down.
Parent topic:
Printer Usage Guidelines
Related references
Where to Get Help
Related topics
Removing Printed Media
Summary of Contents for SureColor S40600
