39
It is best to do the following when using the auto take-up reel:
• Use a take-up roll core that is longer than the width of your media so the media is taken up without
protruding from the core.
• Use the supplied paper tape or any commercially available tape to attach your media to the roll core.
Parent topic:
Using the Auto Take-up Reel
Attaching the Take-up Roll Core to the Auto Take-up Reel
Use a takeup roll core that is longer than the width of your media so the media is taken up without
protruding from the core.
1.
Press and hold the down arrow button until the edge of the loaded media reaches the center of the
after heater.
Note:
Always press the down arrow button to feed media. If you pull the media with your hand, it
may twist during take-up.
Summary of Contents for SureColor S40600
