118
7.
While pressing the tip of the media edge plate against the platen, attach the hooks to the front corner
of the platen.
8.
Confirm that the three hooked sections of the media edge plate are securely attached as shown
here, with no gap between the plate and the platen.
• The latch at the top (1) should hook onto the corner of the platen.
• The latch at the rear of the square hole (2) should rest in the groove on the platen.
Summary of Contents for SureColor S40600
