93
Moving the Print Head for Maintenance
Certain maintenance tasks require that you move the print head as described here before performing the
task.
Caution:
Always move the print head as described here. Do not move the print head manually or you
may cause your product to malfunction.
1.
When the product is turned on, press the
maintenance button on the control panel.
You see the Maintenance menu.
2.
Press the up or down arrow button on the control panel to select
Head Maintenance
and press the
OK
button.
3.
Press the up or down arrow button to select
Regular Cleaning
and press the
OK
button.
4.
Press the
OK
button again.
A confirmation message is displayed when the print head has moved into the maintenance position.
5.
Perform your maintenance task as necessary.
Note:
After 10 minutes, an alarm sounds to warn you that the print head is still in the maintenance
position. Press the
OK
button to continue cleaning. The alarm sounds again at 10 minute intervals if
the print head is not in the home position.
Parent topic:
Performing Regular Cleaning
Related references
Maintenance Menu Settings
Cleaning Around the Print Head
Clean around the print head to remove any ink, lint, or dust that could affect print quality.
1.
Move the print head into the maintenance position.
Caution:
Always move the print head using the control panel. Do not move the print head manually
or you may cause your product to malfunction.
Summary of Contents for SureColor S40600
