Epson SureColor S40600 User Manual Download Page 158

Page: 158 / 170

158

Notices

Check these sections for important notices about your product.

Note:

Epson offers a recycling program for end of life Epson products. Please go to

this site

for

information on how to return your Epson products for proper disposal.

Important Safety Instructions
FCC Compliance Statement
Software License Terms
Trademarks
Copyright Notice

Important Safety Instructions

Before using your Epson product, read and follow these safety instructions.

General Product Safety Instructions
Ink Cartridge Safety Instructions

Parent topic:

Notices

General Product Safety Instructions

• Be sure to follow all warnings and instructions marked on the product.

• Use only the type of power source indicated on the product's label.

• Use only the power cord that comes with the product. Use of another cord may cause fires or shock.

Do not use the cord with any other equipment.

• Place the product near a wall outlet where the plug can be easily unplugged.

• This product has two power systems. Unplug the two power cords during maintenance to avoid the

risk of electric shock. If you are using the print drying system, unplug the power cord for it as well.

• Connect your product to a properly grounded power outlet. Avoid plugging the product into an outlet

on the same circuit as a photo copier or air control system that regularly switches on and off, or on an
outlet controlled by a wall switch or timer.

• Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying,

crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or run over.
Be careful to keep the cord straight at each end.

Summary of Contents for SureColor S40600











































































































































































Search results

Summary of Contents for SureColor S40600

Reviews:

Brands by name

Popular brands

Epson SureColor S40600, User Manual

Search results

Summary of Contents for SureColor S40600

Reviews:

Brands by name

Popular brands