24
• Place unused media is its original packaging for storage.
• Do not load media if the edges are uneven on the roll; this could cause feeding problems. Rewind the
media on the roll or use a different roll.
Parent topic:
Media Handling
Loading Media
Before loading media in your printer, review and follow the media handling guidelines for the best results.
To remove media, follow the steps in this section in reverse.
Caution:
Wait until just before printing to load media. This avoids creases in the media that may be
caused by the pressure rollers. Creased, wavy, or curled media could cause it to jam inside the printer or
contact the print head.
1.
Press the
power button and wait until you see this message on the LCD screen:
Load media
.
Summary of Contents for SureColor S40600
