Epson SureColor S40600 User Manual Download Page 136

Page: 136 / 170

136

6. Make sure the adjusters rest higher than the caster. If necessary, use the included wrench to loosen

the nut on top of the adjuster. Then turn the nut on the bottom counter-clockwise to raise the adjuster.

7. Move the product.

Caution:

Roll the product on the casters for only a short distance over a level floor. Do not transport

the product using the casters. Do not tilt the product more than 10 degrees.

Parent topic:

Moving or Transporting the Product

Related references

Maintenance Precautions

Related tasks

Replacing the Waste Ink Bottle

Related topics

Removing Printed Media

Setting Up the Product After Moving

Follow these steps to set up the product after moving it.

Verify that the location is suitable for installation.

Summary of Contents for SureColor S40600











































































































































































Search results

Summary of Contents for SureColor S40600

Reviews:

Related manuals for SureColor S40600

Brands by name

Popular brands

Epson SureColor S40600, User Manual

Search results

Summary of Contents for SureColor S40600

Reviews:

Related manuals for SureColor S40600

Brands by name

Popular brands