57
•
Shake the White or Metallic Silver ink cartridge
(SC-S80600 only): If you selected
10 Color Mode
(WH)
or
10 Color Mode (MS)
for the
Change Color Mode
setting in the Maintenance menu, be sure
to remove and shake the White or Metallic Silver ink cartridge to prevent sedimentation.
•
Print a nozzle check pattern
: Print a nozzle check pattern to check for clogged nozzles. If any
nozzles are clogged, clean the print head.
Parent topic:
Media Handling
Related concepts
Print Head Maintenance
Related references
Printer Status Menu Settings
Maintenance Menu Settings
Related tasks
Shaking the Ink Cartridges
Saving Sets of Media Settings
You can use the product's control panel to store numbered sets of media settings for each media type
you use. This lets you quickly select all the necessary settings whenever you print on that media type.
Note:
You can also use the Epson Control Dashboard to save media settings.
1.
Press the
Menu
button.
You see the Media Setup menu on the product LCD screen.
2.
Select
Media Setup
and press the
OK
button.
3.
Press the up or down button to select
Easy Media Setup
and press the
OK
button.
4.
Press the up or down button to select the desired media number and press the
OK
button.
Note:
If you select a number with settings already saved to it, the existing settings are overwritten.
5.
Enter a name for the media setting and press the
OK
button.
6.
Press the up or down button to select the media type you loaded and press the
OK
button.
Note:
If you select
Textile
, you need approximately 30.3 inches (770 mm) of media to print the first
adjustment pattern (feed adjustment).
Summary of Contents for SureColor S40600
