Epson Stylus Pro 9000 Printer Manual Download Page 83

Page: 83 / 165

4-8

4-8

Resolving Problems

Blank paper is printed.

Your PPD and/or printer driver
software are not set up correctly or not
selected.

Make sure your software is installed
correctly and the RIP or printer is
selected.

Paper size is not set correctly in your
print options.

Make sure the

Paper Size

setting in your

print options is correct for the paper
you’re using.

You have selected

Sheet

, but you’re

using roll paper.

Make sure your

Paper Source

Media

Option

settings are correct.

A ruled line on your print
appears to shift.

The print head is out of alignment.

Align the print head as described on
page 3-3.

The bottom edge of your
print is smeared.

The paper is curled toward the
printable side.

Flatten the paper or curl it toward the
other side.

Print options are set incorrectly for the
media you’re using (for EPSON media).

Make sure the

Print Mode

Media

Type

setting is correct for the media

you’re printing on.

You’re using the wrong paper
configuration setting (for non-EPSON
media).

Use the control panel to register and
select your paper thickness. See
page 1-25 for instructions.

The platen gap setting is incorrect.

Use the control panel to change the
setting from

AUTO to WIDE.

See

page 1-20 for instructions.

Color images print in black
only.

Your PPD and/or printer driver
software are not set up correctly or not
selected.

Make sure your software is installed
correctly and the RIP or printer is
selected.

Black printing is selected in your print
options.

Make sure color printing is selected.

The printer continues to
feed paper after you have
cancelled a job.

The printer still has print job data in its
buffer.

Press the

Pause

button on the printer. If

you’re using the RIP, wait until it is idle.
Then press and hold the

Pause

button to

reset the printer.

Miscellaneous printing problems (continued)

Problem

Possible cause

Solution

Summary of Contents for Stylus Pro 9000






































































































































































Search results

Summary of Contents for Stylus Pro 9000

Reviews:

Related manuals for Stylus Pro 9000

Brands by name

Popular brands

Epson Stylus Pro 9000, Printer Manual

Search results

Summary of Contents for Stylus Pro 9000

Reviews:

Related manuals for Stylus Pro 9000

Brands by name

Popular brands