3-18
3-18
|
Maintaining and Transporting the Printer
7. While holding the printer unit, remove the screws from the left and
right sides. Keep the screws in a safe place.
8. Have four people lift the printer unit off of the leg assembly, using the
hand grips. Lift the back of the printer first, tilt it slightly to the front,
then slide it back to remove it.
9. Keep the printer level while you move it.
Setting Up the Printer After Transporting It
Setting up the printer after transporting it is almost identical to setting it up
for the first time. Whenever you set up the printer, see the
Assembly and
Setup Instructions
, and note the following points:
•
Don’t forget to open the side ink valve locks. The printer can’t print
while they are closed.
•
Don’t forget to remove any protective material (such as tape from the
ink cartridge clamps).
Warning
The printer unit weighs
approximately 212 lb
(96 kg). Always have four
people lift it, using the hand
grip areas as shown.
Summary of Contents for Stylus Pro 9000
Page 1: ...EPSON Stylus Pro 9000 Series PRINTER GUIDE ...
Page 9: ... x x Contents ...
Page 89: ...4 14 4 14 Resolving Problems ...
Page 97: ...5 8 5 8 Specifications ...
