1-13
Handling Paper and Other Media
|
1-13
6. Push the paper set lever all the way down, then close the roll paper
cover.
PRESS PAUSE BUTTON
appears on the control panel display.
If you’re using Auto Cut and the edge of the paper is uneven, press
Cut/Eject
to recut the edge.
7. Press the
Pause
button. The print head moves and the paper feeds into
printing position automatically.
READY
appears on the control panel
display. (Even if you don’t press
Pause
, the paper and printer will move
into printing position automatically after 10 seconds.)
Cutting Paper Manually with the Built-in Cutter
When you’re not using the
Auto Cut
setting, you need to cut the paper
manually after your print job is finished. If you’re printing on canvas, vinyl,
or other heavy media, you should use scissors or a utility cutter rather than
the built-in cutter. See page 1-14 for instructions. Follow these steps to cut
manually with the built-in cutter:
1. If the paper is not positioned correctly, press one of the
Paper Feed
buttons to adjust the paper position. Normally, you don’t need to do
this after a print job is finished.
2. Press the
Paper Source
button until the
Roll Auto Cut
light comes on.
3. Press the
Cut/Eject
button. The paper is cut.
Caution
To avoid damaging the
printer, never move the
paper set lever while the
Operate
or
Pause
light
is flashing.
Summary of Contents for Stylus Pro 9000
Page 1: ...EPSON Stylus Pro 9000 Series PRINTER GUIDE ...
Page 9: ... x x Contents ...
Page 89: ...4 14 4 14 Resolving Problems ...
Page 97: ...5 8 5 8 Specifications ...
