1-25
Handling Paper and Other Media
|
1-25
Setting Paper Configurations
When you use non-EPSON paper or other media, you may need to register
the paper’s thickness and drying time. On the EPSON Stylus Pro 9500, you
can also register the suction setting. The only way to tell if you need to
register new media is by experimentation.
When you’re using a paper stock or other printing material for the first time,
always test it on a small print job. If the ink smears or printing is blurred,
you need to register the paper’s drying time, and thickness (or suction
setting). Registration is not necessary when you use EPSON media. You can
register up to four types of paper or other media. Then you can select the
registered values whenever you print on that particular stock.
Drying time determines how long the printer will pause between pages or
before cutting.
Registering Paper Thickness, Drying Time, and Suction
To register a new paper stock, load it into the printer and follow these steps:
1. Press the
SelecType
button until
PAPER CONFIG. MENU
appears on
the display.
2. Press the
Item
button.
PAPER NUMBER=STD*
appears on the display.
3. If you’re registering your first roll or batch of paper, press the
+
button
to select
PAPER NUMBER=1
. Then press the
Enter
button.
For subsequent rolls, continue pressing the
+
button to select the
number you want to register.
4. Press the
Item
button.
THICK. PAT=PRINT
appears on the display.
Press
Enter
to print the paper thickness test pattern. You may see
PAPER THICK. NO.=1
on the display.
Following is a sample pattern:
Note
It’s a good idea to keep a
list of your registered
paper types and
numbers.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Summary of Contents for Stylus Pro 9000
Page 1: ...EPSON Stylus Pro 9000 Series PRINTER GUIDE ...
Page 9: ... x x Contents ...
Page 89: ...4 14 4 14 Resolving Problems ...
Page 97: ...5 8 5 8 Specifications ...
