manualshive.com logo in svg

Epson Stylus Pro 4800 Portrait Edition, Service Manual

The Epson Stylus Pro 4800 Portrait Edition is a top-notch professional printer that delivers exceptional results. To ensure a hassle-free setup and optimal performance, download the free Setup Manual from our website. Get acquainted with this outstanding printer and unleash your creativity with confidence.

Share
Download
background image

EPSON Stylus Pro 4400/4450/4800/4880/4880C

Revision C

Product Description

Operating Panel

60

1.4.4.20  Status Printing

Selecting this mode allows the user to print the current panel settings content.

Print status sheet with the following specifications.

„

Print paper size: A4

„

Font:

Built-in font (Print all in alphanumeric characters)

„

Print sample:

Refer to 

Figure 1-15.  "Status Sheet Print Pattern (8-

color Stylus Pro 4800)"

 and 

Figure 1-17.  "Status 

Sheet Print Pattern (4-color Stylus Pro 4400)"

†

Output procedure:

1.

Press the [Menu / Cleaning] button on the control panel to enter the 
panel setting menu.

2.

Press the [Paper Feed (

∧

/

∨

)] button to display "TEST PRINT".

3.

Press the [Menu / Cleaning] button to enter the item menu select 
status and then press the [Paper Feed (

∧

/

∨

)] again to display [STATUS 

CHECK].

4.

Select the item by pressing the [Menu / Cleaning] button again.

5.

Press the [Menu / Cleaning] button to execute status sheet printing.

Figure 1-15. Status Sheet Print Pattern (8-color Stylus Pro 4800)

Type B  :  Installed                                                   
-Current S-----------------+-Printer Status--+-----------------
Platen Gap       :Standard         |Version          :A0xxxx P         
Page Line        :On               |Total Prints     :xxxxxx PG        
Interface        :Auto             |Use Ink          :xxxxxx.xml       
Code Page        :PC437            |Use Paper        :xxxxxx.xcm       
Margin           :T/B15mm          |Mainte Tank      :E*****F          
Paper Size Chk   :On               |Cutter Life      :E*****F          
Paper Align Chk  :On               |CR Motor         :E*****F          
Time Out         :30sec            |PF Motor         :E*****F          
Refresh Margin   :On               |Head             :E*****F          
Sheet Size Chk   :On               |Cleaner          :E*****F          
Auto Nozzle Chk  :Off              |                 :                 
Auto Cleaning    :On               |                 :                 
Quiet Cut        :Off              |                 :                 
-Ink Cartridge---+-----------------+-----------------+-----------------
Manufacture      :EPSON GENUINE INK EPSON GENUINE INK EPSON GENUINE INK
Ink Type         :     Pigment           Pigment           Pigment     
Ink Color        :    Matte Black         Cyan             Magenta     
Ink Capacity     :      110ml             110ml             110ml      
Ink Left         :     E*****F           E*****F           E*****F     
Production Date  :     `02/03            `02/03            `02/03      
Expire Date      :     `03/10            `03/10            `03/10      
Ink Life         :    06 months         06 months         06 months    
Passed           :    02 months         02 months         02 months    
Printable Sheet  :    120 pages         120 pages         120 pages    
-----------------+-----------------+-----------------+-----------------
Manufacture      :EPSON GENUINE INK EPSON GENUINE INK EPSON GENUINE INK
Ink Type         :     Pigment           Pigment           Pigment     
Ink Color        :      Yellow         Light Black        Light Cyan   
Ink Capacity     :      110ml             110ml             110ml      
Ink Left         :     E*****F           E*****F           E*****F     
Production Date  :     `02/03            `02/03            `02/03      
Expire Date      :     `03/10            `03/10            `03/10      
Ink Life         :    06 months         06 months         06 months    
Passed           :    02 months         02 months         02 months    
Printable Sheet  :    120 pages         120 pages         120 pages    
-----------------+-----------------+-----------------+-----------------
Manufacture      :EPSON GENUINE INK EPSON GENUINE INK                  
Ink Type         :     Pigment           Pigment                       
Ink Color        :   Light Magenta  Light Light Black                  
Ink Capacity     :      110ml             110ml                        
Ink Left         :     E*****F           E*****F                       
Production Date  :     `02/03            `02/03                        
Expire Date      :     `03/10            `03/10                        
Ink Life         :    06 months         06 months                      
Passed           :    02 months         02 months                      
Printable Sheet  :    120 pages         120 pages                      
-----------------+-----------------+-----------------+-----------------

Summary of Contents for Stylus Pro 4800 Portrait Edition



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Stylus Pro 4800 Portrait Edition

Yamaha DM 1000 Manual preview
DM 1000
Brand: Yamaha Pages: 30
Campbell PC208 Instruction Manual preview
PC208
Brand: Campbell Pages: 133
McDATA OPENconnectors Command Line Interface Manual preview
OPENconnectors
Brand: McDATA Pages: 170
3Com 3CR15800 - Intelligent Management Center Enterprise... Datasheet preview
3CR15800 - Intelligent Management Center Enterprise...
Brand: 3Com Pages: 4
Brocade Communications Systems Brocade 8/12c Installation Manual preview
Brocade 8/12c
Brand: Brocade Communications Systems Pages: 47
HP PROBOOK 4425S Specifications preview
PROBOOK 4425S
Brand: HP Pages: 4
EVGA drivers for video card Driver Manual preview
drivers for video card
Brand: EVGA Pages: 23
Red Hat DEVICE-MAPPER MULTIPATH 5.2 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 5.2
Brand: Red Hat Pages: 44
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.2
Brand: Red Hat Pages: 78
Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD Tutorial preview
05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD
Brand: Autodesk Pages: 21
Autodesk 00128-051462-9340 - AutoCAD 2008 - PC Manual preview
00128-051462-9340 - AutoCAD 2008 - PC
Brand: Autodesk Pages: 48
FieldServer FS-8700-87 Driver Manual preview
FS-8700-87
Brand: FieldServer Pages: 10
Spectra Logic Spectra nTier File Migrator User Manual preview
Spectra nTier File Migrator
Brand: Spectra Logic Pages: 92
Qlogic SANsurfer FC HBA Manager Application User Manual preview
SANsurfer FC HBA Manager Application
Brand: Qlogic Pages: 218
KIP PrintNET 7.X Enterprise Operation Manual preview
PrintNET 7.X Enterprise
Brand: KIP Pages: 37
Navman S60 User Manual preview
S60
Brand: Navman Pages: 15
Navman NavDesk 2009 User Manual preview
NavDesk 2009
Brand: Navman Pages: 36
Epson PowerLite S17 Quick Setup preview
PowerLite S17
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands