manualshive.com logo in svg

Epson Stylus Pro 4800 Portrait Edition, Service Manual

The Epson Stylus Pro 4800 Portrait Edition is a top-notch professional printer that delivers exceptional results. To ensure a hassle-free setup and optimal performance, download the free Setup Manual from our website. Get acquainted with this outstanding printer and unleash your creativity with confidence.

Share
Download
background image

EPSON Stylus Pro 4400/4450/4800/4880/4880C

Revision C

Product Description

Operating Panel

100

Figure 1-24. Adjustment Parameter Print Sample

Table 1-43. Print Menu Item

Print menu

Item

Test pattern

Nozzle ink eject check pattern
Vertical nozzle arraignment 
check pattern
Horizontal nozzle arraignment 
check pattern

Uni-D adjustment
Bi-D adjustment (PG1.2mm 
VSD1 to 3)

Bi-D adjustment (PG0.7mm 
VSD1 to 3)

Adjustment  
parameter

The adjusted parameters are printed. (Refer to Figure 1-22.)

[R4CD400 xColoros] Adjust Parameter
Serial No. : _______________ , Mecha No. : ---------- , Tool Version : xxxxxxx
                               Belt No.  : xxx , PC No.       : xx
xx-xx-xxxx xx:xx:xx
F/W Version   : A0xxxx.xxxx
NVRAM Version : Main xxxx xxxx ,Mecha xxxx xxxx

Type-B        : Uninstalled

Head Rank ID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ColorID:xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 

xx xx xx
        xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 

xx xx xx
Gap Parameter 4Colors ----------   User Area  ----------    ---------- Backup Area -------------
    VSD1               C  C2   Y  Y2     M   M2   MK  MK2      C  C2   Y  Y2   M   M2   MK  MK2
Bi-D PG 0.7mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 1.2mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 1.5mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 2.1mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 2.6mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Uni-D              :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx

    VSD2               C  C2   Y  Y2     M   M2   MK  MK2      C  C2   Y  Y2   M   M2   MK  MK2
Bi-D PG 0.7mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 1.2mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 1.5mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 2.1mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 2.6mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Uni-D              :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx

    VSD3               C  C2   Y  Y2     M   M2   MK  MK2      C  C2   Y  Y2   M   M2   MK  MK2
Bi-D PG 0.7mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 1.2mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 1.5mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 2.1mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Bi-D PG 2.6mm      :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx
Uni-D              :  xx  xx  xx  xx    xx  xx    xx   xx     xx  xx  xx  xx  xx   xx   xx   xx

PF Adjust           : 1002.349 mm  Bi-D PF Adjust              : -1
Top Margin Adjust   :    8.903 mm  Rear Sensor Position Adjust : 13.099 mm  Multi Sensor Left  :  0.000 mm
Bottom Margin Adjust:   13.602 mm  ASF Top Margin              : 10.300 mm  Multi Sensor Right :  0.000 mm
Side Margin Adjust  :    9.895 mm  ASF Side Margin             :  8.696 mm

PG Adjust =  45   Pump Counter =   11390   Cut Paper Pre. = 100 %   Cut Pressure =  70 %   Rear AD =C6

Platen Position 1:0 /  2:0 /  3:0 /  4:0 /  5:0 /  6:0 /  7:0 /  8:0 /  9:0 /  10:0

Multi-Sensor Position Adjust  PG 0.7mm  PG 1.2mm  PG 1.5mm  PG 2.1mm  PG 2.6mm
   Horizontal [mm]          :      0.0       0.0       0.0       0.0       0.0
   Vertical   [mm]          :      0.0       0.0       0.0       0.0       0.0

Error  1 : xxxxxxxx  xx-xx-xx xx:xx:xx      Error  6 : xxxxxxxx xx-xx-xx xx:xx:xx
Error  2 : xxxxxxxx  xx-xx-xx xx:xx:xx      Error  7 : xxxxxxxx xx-xx-xx xx:xx:xx
Error  3 : xxxxxxxx  xx-xx-xx xx:xx:xx      Error  8 : xxxxxxxx xx-xx-xx xx:xx:xx
Error  4 : xxxxxxxx  xx-xx-xx xx:xx:xx      Error  9 : xxxxxxxx xx-xx-xx xx:xx:xx
Error  5 : xxxxxxxx  xx-xx-xx xx:xx:xx      Error 10 : xxxxxxxx xx-xx-xx xx:xx:xx

Serial No.     : xx xx xx xx xx xx xx xx xx xx
USB Serial No. : xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
IEEE1394 ID    : xx xx xx xx xx
Factory Flag   : xx xx xx xx xx xx xx xx

Summary of Contents for Stylus Pro 4800 Portrait Edition



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Stylus Pro 4800 Portrait Edition

Canon imagePROGRAF W6400 Manual preview
imagePROGRAF W6400
Brand: Canon Pages: 84
3Com 3C16120 - SuperStack 3 Server Load Balancer Release Note preview
3C16120 - SuperStack 3 Server Load Balancer
Brand: 3Com Pages: 20
M-Audio Afro-Cuban Percussion Quick Start Manual preview
Afro-Cuban Percussion
Brand: M-Audio Pages: 5
Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Brand: Vaisala Pages: 168
Novation V-Station User Manual preview
V-Station
Brand: Novation Pages: 93
Crestron SIMPL Windows Installation & Operating Manual preview
SIMPL Windows
Brand: Crestron Pages: 230
MACROMEDIA FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH Manual preview
FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH
Brand: MACROMEDIA Pages: 830
Xerox Phaser 340 Installer Installation preview
Phaser 340 Installer
Brand: Xerox Pages: 2
Hitachi Dynamic Link Manager User Manual preview
Dynamic Link Manager
Brand: Hitachi Pages: 746
HP Configuring Arrays Reference Manual preview
Configuring Arrays
Brand: HP Pages: 132
HP 413742-001 Troubleshooting Manual preview
413742-001
Brand: HP Pages: 26
HP 500 G2 Software User'S Manual preview
500 G2
Brand: HP Pages: 35
HP 460C - Deskjet Color Inkjet Printer User Manual preview
460C - Deskjet Color Inkjet Printer
Brand: HP Pages: 24
HP Compaq tc4200 Maintenance And Service Manual preview
Compaq tc4200
Brand: HP Pages: 201
HP BB118BV - StorageWorks Data Protector Express Package User Manual preview
BB118BV - StorageWorks Data Protector Express Package
Brand: HP Pages: 365
HP BB118BV - StorageWorks Data Protector Express Package Installation Manual preview
BB118BV - StorageWorks Data Protector Express Package
Brand: HP Pages: 35
HP 2605dtn - Color LaserJet Laser Printer Reference preview
2605dtn - Color LaserJet Laser Printer
Brand: HP Pages: 372
HP e-diagtools 4.0 User Manual preview
e-diagtools 4.0
Brand: HP Pages: 74

Brands by name

Popular brands

Load more brands