EPSON Stylus Pro 4400/4450/4800/4880/4880C
Revision C
Disassembly & Assembly
Disassembly Procedures
240
4.2.4.6 C593_SUB-D Board
1.
Remove "Panel, Front/Panel Unit"
2.
Disconnect all the connectors/harnesses on the "C593_SUB-D Board".
Note 1: Refer to
for connector positions.The CN 45 is not used.
2: When connecting harnesses to the C593_SUB-D Board, connect them in the
order shown in
.
3.
Remove the four screws securing "C593_SUB-D Board" and remove
"C593_SUB-D Board".
C.B.P. 3x6:
4 pcs.
Figure 4-49. C593_SUB-D Board Connector Positions
Figure 4-50. C593_SUB-D Board Removal
Table 4-9. Connectors/Harnesses Connected to C593_SUB-D Board
Connection
Order
Connector
No.
Color/
Mark
Number
of Pins
Connection Socket
1
CN1
-
31
C593 MAIN Board (CN7)
2
CN2
-
31
C593 MAIN Board (CN8)
3
CN3
-
30
C593 MAIN Board (CN9)
4
CN4
-
30
C593 SUB Board (CN1)
5
CN5
-
31
Print Head Board (CN1)
6
CN6
-
31
Print Head Board (CN2)
Each "Harness, Head, Intermit" and "Harness, Head" is
marked with its connector No. Refer to
connect the harnesses properly.
Connector Numbers
CN3
CN1
CN6
CN4
CN5
CN2
C.B.S. 3x6
Summary of Contents for Stylus Pro 4800 Portrait Edition
