Epson ET-5800 Series, User Manual

Page: 439 / 462

Group Policy Setting Items
Items Settings and Explanation
Enable this Group Policy You can enable or disable a group policy.
Access Control
Configure a control method for traffic of IP packets.
Items Settings and Explanation
Permit Access Select this to permit configured IP packets to pass through.
Refuse Access Select this to refuse configured IP packets to pass through.
IPsec Select this to permit configured IPsec packets to pass through.
Local Address(Printer)
Select an IPv4 address or IPv6 address that matches your network environment. If an IP address is assigned
automatically, you can select
Use auto-obtained IPv4 address
.
Note:
If an IPv6 address is assigned automatically, the connection may be unavailable. Configure a static IPv6 address.
Remote Address(Host)
Enter a device's IP address to control access. The IP address must be 43 characters or less. If you do not enter an IP
address, all addresses are controlled.
Note:
If an IP address is assigned automatically (e.g. assigned by DHCP), the connection may be unavailable. Configure a static IP
address.
Method of Choosing Port
Select a method to specify ports.
❏
Service Name
If you select
Service Name
for
Method of Choosing Port
, select an option.
❏
Transport Protocol
If you select Port Number for Method of Choosing Port , you need to configure an encapsulation mode.
Items Settings and Explanation
Any Protocol Select this to control all protocol types.
TCP Select this to control data for unicast.
UDP Select this to control data for broadcast and multicast.
ICMPv4 Select this to control ping command.
Administrator Information
>
Advanced Security Settings
>
Encrypted Communication Using IPsec/IP Filtering
439