Note:
You can also set up from the printer’s control panel.
Settings
>
General Settings
>
Basic Settings
>
Sounds
1.
Access Web Config and select the
Device Management
tab >
Sound
.
2.
Set up the following items as necessary.
❏
Normal Mode
Set the sound when the printer is set to
Normal Mode
.
❏
Quiet Mode
Set the sound when the printer is set to
Quiet Mode
.
This is enabled when the one of the following items is enabled.
❏
Printer's control panel:
Settings
>
General Settings
>
Printer Settings
>
Quiet Mode
Settings
>
General Settings
>
Fax Settings
>
Receive Settings
>
Print Settings
>
Quiet Mode
❏
Web Config :
Fax
tab >
Print Settings
>
Quiet Mode
3.
Click
OK
.
Synchronizing the Date and Time with Time Server
When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network. The time server may be operated within the organization or published on the Internet.
When using the CA certificate or Kerberos authentication, time-related trouble can be prevented by synchronizing
with the time server.
1.
Access Web Config and select the
Device Management
tab >
Date and Time
>
Time Server
.
2.
Select
Use
for
Use Time Server
.
3.
Enter the time server address for
Time Server Address
.
You can use IPv4, IPv6 or FQDN format. Enter 252 characters or less. If you do not specify this, leave it blank.
4.
Enter
Update Interval (min)
.
You can set up to 10,080 minutes by the minute.
5.
Click
OK
.
Note:
You can confirm the connection status with the time server on
Time Server Status
.
>
>
Making Basic Operation Settings for the Printer
426
