Projector Network Settings - Network Menu
238
Setting
Options
Description
SNMP
On
Off
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
The default value is Off.
Trap IP Address 1
Trap IP Address 2
IP address
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
Set the SNMP community name.
PJLink Notification On
Off
Enables or disables the PJLink
notification function.
Notified IP Address IP address
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Network Menu - Others Menu
Settings on the Others menu let you select other network settings.
s
Network > Network Configuration > Others
Setting
Options
Description
Secure HTTP
On
Off
To strengthen security, communication
between the projector and computer in
Web control is encrypted. When setting
security with Web control, it is
recommended to set this to On.
Web Server Cert.
—
Imports the Web server certificate for
secure HTTP.
Priority Gateway
Wired LAN
Wireless LAN
You can set the priority gateway.
AMX Device
Discovery
On
Off
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Crestron
RoomView
On
Off
Set to On only when monitoring or
controlling the projector over the
network using Crestron RoomView.
Enabling Crestron RoomView disables
the Epson Message Broadcasting feature
in the Epson Projector Management
software.
Summary of Contents for EB-1470Ui
Page 1: ...User s Guide ...
