manualshive.com logo in svg

Epson DFX-5000+, Service Manual

The Epson DFX-5000+ Service Manual is now available for free download on our website. This comprehensive manual provides detailed instructions and troubleshooting tips to ensure optimal performance of your Epson DFX-5000+ printer. Get the most out of your product with this convenient user manual, downloadable from manualshive.com.

Share
Download
background image

Disassembly and Assembly

Removing the Rear Tractor Assembly

This section describes how to remove the rear tractor assembly. You need to
remove the rear tractor assembly before removing the black, 3-pin, rear PE sensor
connector from the connector junction board assembly.

1.

2.

3.

4.

5.

6.

7.

Remove the connector junction board assembly. (See page 3-32.)

Remove the rear tractor gear.

Loosen the 2 hexagonal nuts securing the shaft at the front 

 rear tractor

assembly to the left and right side frames.

After loosening the hexagonal nut on the right side, remove the right tractor
wire holder.

To release the tractor wire, remove the CPN (M4 x 8) screw securing the left

tractor wire spring wire set to the left side frame. (See the description in the
previous section 

Remove the 2 E-rings securing the shaft at the back 

 rear tractor

assembly to the both sides frame.

To remove the rear tractor assembly, first move it to the left. Remove the right
side 

 shaft by pulling it forward, and then remove the left side 

shaft.

E tin 

Washer

 Spring

Figure 3-53. Removing the Rear Tractor Assembly

Adjustment Required

When you install the 

 tractor assembly, perform the tractor wire spring adjustment, us

described in Chapter 4.

3-48

EPSON 

 Service Manual

Summary of Contents for DFX-5000+
































































































































































































































Reviews:

No comments

Related manuals for DFX-5000+

Radio Shack TRS-80 Operation Manual preview
TRS-80
Brand: Radio Shack Pages: 57
Oki MB451wMFP Wireless Setup Manual preview
MB451wMFP
Brand: Oki Pages: 4
Oki MB441MFP Safety Information Manual preview
MB441MFP
Brand: Oki Pages: 40
Oki MC573 Advanced Manual preview
MC573
Brand: Oki Pages: 507
Oki MB441MFP User Manual preview
MB441MFP
Brand: Oki Pages: 176
Samsung SL-M3870FW User Manual preview
SL-M3870FW
Brand: Samsung Pages: 351
Oki LE840D Safety Information Manual preview
LE840D
Brand: Oki Pages: 28
Xerox Stacker 701P98048 Operator'S Manual preview
Stacker 701P98048
Brand: Xerox Pages: 16
WANHAO GADOSO GR1 User Manual preview
GADOSO GR1
Brand: WANHAO Pages: 25
Kyocera KM-1820 Quick Start Manual preview
KM-1820
Brand: Kyocera Pages: 2
MAC TOOLS P 9300 Instruction Manual preview
P 9300
Brand: MAC TOOLS Pages: 2
A&D AD-8120 Instruction Manual preview
AD-8120
Brand: A&D Pages: 32
Konica Minolta bizhub PRO C65hc Additional Information preview
bizhub PRO C65hc
Brand: Konica Minolta Pages: 24
EcLine EC-PM-80320D User Manual preview
EC-PM-80320D
Brand: EcLine Pages: 72
3D Systems ProX DMP 200 User Manual preview
ProX DMP 200
Brand: 3D Systems Pages: 103
Epson 5700i - EPL B/W Laser Printer Setup Manual preview
5700i - EPL B/W Laser Printer
Brand: Epson Pages: 33
Epson 2180 - LQ B/W Dot-matrix Printer Specifications preview
2180 - LQ B/W Dot-matrix Printer
Brand: Epson Pages: 2
Epson 2190 - FX B/W Dot-matrix Printer Specifications preview
2190 - FX B/W Dot-matrix Printer
Brand: Epson Pages: 2

Brands by name

Popular brands

Load more brands