Epson DFX-5000+, Service Manual

Page: 40 / 223

Product Description
Note : The tear off and paper select functions are not available when the paper
memory function is used.
Using the Paper ory Function
To use the paper memory function, you must first save paper format and
thickness information for up to two different types as described in the
section below.
To turn on the paper memory function after saving your paper format and
thickness information, hold down one buttons below and turn on the printer.
MICRO FEED (
A
)
MICRO FEED (v)
Recalls the paper format and thickness information stored
in memory area 1.
Recalls the paper format and thickness information stored
in memory area 2.
To turn paper memory function and use normal paper, hold down the
PAPER SELECT button and turn on the printer.
Notes: A l-inch skip over perforation area is automatically included for
overlapping forms.
ESC C (set page length) is valid when using the paper memory function.
ESC N (set skip over perforation) is valid when using the paper memory
function; however, skip length is less than 1 inch, the setting is
ignored when using overlapping forms.
ESC 0 (reset skip over perforation) is valid when using the paper
memory function with overlapping forms.
When using overlapping forms, the loading position must be adjusted
each time you load paper.
Saving Paper Form at and Thickness Inform ution
To save paper format and thickness information for overlapping forms, forms with
a label, or overlapping forms with a label, follow these steps:
1. Turn printer
2. Use DIP switch 3-4 to select the memory area where you want the printer to
store the paper format and thickness information. Memory area 1 is selected
when DIP switch 3-4 is off. This is the printer’s default setting. To select
memory area 2, turn on the switch.
Table l-9. Selecting the Paper Memory Area
Paper Memory Area
DIP SW 3-4
1
I
ON
I
3. Use DIP switches 3-l and 3-2 or software commands to set the page length.
1-26 EPSON DFX-5000+ Service Manual