Disassembly and Assembly
Removing the Plunger and Paper Bail Assembly
This section describes how to remove the plunger (loading solenoid) and paper bail
assembly.
1.
Disconnect the black, 2-pin plunger connector from the connector junction
board assembly, and remove the plunger cable from the connector junction
board assembly. (Refer to the Appendix for more information on connector
junction board cable connections.)
2.
Remove the 2 CPS (SP) (M3 x 6) screws securing the plunger to the left side
frame and remove the plunger.
3.
Remove the iron core
plunger from the paper bail shaft.
Iron Core
connector
Figure 3-37. Removing the Plunger
3-34
EPSON
Service Manual
Summary of Contents for DFX-5000+
