Epson DFX-5000+, Service Manual

Page: 27 / 223

Product Description
6. Paper stapling must be applied for both feeding directions. Figure 1-16 shows
a cross section of the stapled area.
Paper Feeding Direction
Figure 1-16. Stapled Area 2
7. The binding area must be flat. Figure 1-17 shows a cross section stapled
area.
Incorrect
Figure 1-17. Stapled Area 3
8. Never use forms joined with metal staples
9. The binding (dots of paste or paper staples) must be outside the printable area.
10. Overlapping multi-part forms must be bound at the top side by spot gluing.
The binding must be secure and there should be no spilled glue. Figure 1-18
shows the correct multi-part form binding method.
11. Multi-part form sheets should be securely bound to each other, and the binding
area must not be too large.
Carrier Carrier
Figure 1-18. Correct Multi-part Form Binding Figure 1-18. Correct Multi-part Form Binding
EPSON Service Manual
1-13