Version 2.65 Jul. 2009
78
User's Manual
Installer, SetupPOS, TMUSB
these versions at a time. Use the combination of MSR and Keylock of
either version (only version 1.xx or only version 2.xx). MSR and Keylock
use the keyboard interface and keyboard monitoring driver
(EPSONHKO). However, this driver differs form version 1.xx and version
2.xx, so it is impossible to use MSR and Keylock devices of both
versions at a time.
"Start hooking keyboard input for this device" list box
This list box displays the list of devices which are monitored by the Hook
Control.
If the setting of the "Start hooking keyboard input for this device" check
buttons is changed, the setting is valid.
"Show Keylock position adjustment dialog box at system start up"
check buttons
This setting is available only when selecting the Keylock.
If the [Yes] button is selected, when the system runs, a dialog box
appears and prompts for change of the position.
Then follow the instructions and modify the position so that the key
position can be correctly adjusted. Usually, select the [Yes] button.
If the [No] button is selected, then the dialog box will not appear.
However, when starting the system, the Keylock position must at least
be modified once. To know the initial state of the Keylock correctly,
select the [Yes] button.
[CheckHealth Interactive] button
Use this button to call the CheckHealth method for the selected device
using Level = OPOS_CH_INTERTACTIVE.
For details, see the manual of each device.
[Device Specific Settings] button
Use this button to display the ”Device specific Setting” dialog box and
change the device specific settings for the selected device.
If the selected device does not support device specific settings, then this
button becomes disabled. For details, see the manual of each device.
[OK] button
Use this button to close the dialog box and save the setting information
to the registry.
