Version 2.65 Jul. 2009
74
User's Manual
Installer, SetupPOS, TMUSB
"Port is being used by" combo box
This combo box contains a list of devices already set up for the port
number selected.
Detailed settings of the port
The settings from "BaudRate" to "Handshake" apply to the serial port.
Change these settings to match the printer's settings. If the detailed
settings of a master device in Hydra connection are changed, then the
settings of its slave devices are also changed automatically. Also, as
mentioned above, the detailed settings of the slave devices cannot be
changed directly.
"BaudRate" combo box
Use this combo box to display or set the communication speed of the
serial port. The values that can be used depend on the device
information file (INF file). For information on the communication speed,
refer to the hardware manual of the device.
If the selected port is parallel, USB, network, wireless port, or "None",
then this setting cannot be set or changed. For a slave device in Hydra
connection, the speed is displayed but cannot be modified.
"BitLength" combo box
Use this combo box to display or set the data bit length of the serial port.
The values that can be used depend on the device information file (INF
file). For information on data bit length of the device, refer to the
hardware manual of the device.
If the selected port is parallel, USB, network, wireless port, or "None",
then this setting cannot be set or changed. For a slave device in Hydra
connection, the value is displayed but cannot be modified.
"Parity" combo box
Use this combo box to display or set the parity bit length of the serial
port. The values that can be used depend on the device information file
(INF file). For information on parity bit of the device, refer to the
hardware manual of the device.
If the selected port is parallel, USB, network, wireless port, or "None",
then this setting cannot be set or changed. For a slave device in Hydra
connection, the value is displayed but cannot be modified.
