Version 2.65 Jul. 2009
43
User's Manual
Installer, SetupPOS, TMUSB
the information necessary for the registry is stored in a file. By specifying this file
with the Installer, it is possible to restore the same environment.
To use this function, follow the procedure described below.
In this section, the originally created environment is called the “main PC”, and the
environment that you want to reconstruct is called “target PC”.
<Procedure>
(1) Install the EPSON OPOS ADK in the main PC, and set the necessary
information and the various devices using the SetupPOS utility.
Use the SetupPOS utility to save the registry. At this point, pay attention to
the following and create the files.
•
Specify “Register All”.
(2) Perform installation on the target PC.
At this point, the following two methods are available. Select the method
that suits the environment.
•
Installation using the normal installation method.
•
Installation using the Silent Installation method.
For the normal installation method, take the procedures described in “3.3
Installation”. For installation using the Silent Installation method, see
Section 3. “3.11. Silent Installation”.
When installing on the target PC, specify the registry file saved in
procedure (1).
<Restrictions>
•
The Registry File must be created using the SetupPOS utility.
•
It is a prerequisite that the Registry File contains the same version
information as the version to be installed, or the same information as the
installed environment.
•
When a registry file is specified using the installer User Interface, install
components are not determined automatically. Desired components
should be selected using the installer User Interface.
•
With the installation using the Registry File, the old version’s information
is not succeeded.
