Version 2.65 Jul. 2009
122
User's Manual
Installer, SetupPOS, TMUSB
"The number has been searched below." edit field
Multiple port numbers in the search result appear. To set the port number
manually, click the [OK] button after selecting the port number.
To narrow the port number choice, press the [Search] button again.
[OK] button
Use this button to end the “USB AutoSetup” wizard, and set the port number
(found in the search) to “USB Port Setting” of the communication setting.
[Search] button
Use this button to search the port number again. Usually, use this button to
narrow the port number choice from the multiple port numbers. Before
searching again, open the cover of the POSPrinter not to be included in the
search target so that communication becomes not possible.
[Cancel] button
Use this button to cancel the operation, then return to the device
communication settings wizard of the “Add New Device” wizard or the
“Communication settings” dialog box.
(3)
If no search target device is found:
[Search] button
Use this button to search the port number again.
Before searching again, make sure the target devices are correctly stated and
are connected.
[Cancel] button
Use this button to cancel the operation, then return to the device
communication settings wizard of the “Add New Device” wizard or the
“Communication settings” dialog box.
5.4. About the Warning Dialog Box
5.4.1. The Contradictory Warning of a Setup of Registry
If inconsistency is found in the OPOS registry settings when the Setup program
starts, or after devices are registered or settings modified, this dialog box appears.
The detected inconsistency is listed in the list box of the appropriate tab of the
dialog box. If multiple inconsistencies occur, they are listed in the list boxes of the
respective tabs.
Four types of inconsistencies can be detected, as listed below:
(1)
Logical device inconsistency
