Version 2.65 Jul. 2009
75
User's Manual
Installer, SetupPOS, TMUSB
"StopBit" combo box
Use this combo box to display or set the stop bit of the serial port. The
values that can be used depend on the device information file (INF file).
For information on stop bit of the device, refer to the hardware manual of
the device.
If the selected port is parallel, USB, network, wireless port, or "None",
then this setting cannot be set or changed. For a slave device in Hydra
connection, the value is displayed but cannot be modified.
"Handshake" combo box
Use this combo box to display or set the handshake of the serial port.
The values that can be used depend on the device information file (INF
file). For information on handshake of the device, refer to the hardware
manual of the device.
If the selected port is parallel, USB, network, wireless port, or "None",
then this setting cannot be set or changed. For a slave device in Hydra
connection, the value is displayed but cannot be modified.
"InputBuf" edit field
This edit field supports only Version 1.xx devices.
Use this edit field to display or set the input buffer size of the serial port.
The range of acceptable values is 32 to 8192.
If the selected port is parallel, USB, network, wireless port, or "None",
then this setting cannot be set or changed. For a slave device in Hydra
connection, the information is displayed but cannot be modified. Also,
the default value has been optimized to allow for normal operation.
"OutputBuf" edit field
Use this edit field to display or set the size of the output buffer size of the
serial, parallel, network, or wireless port. The range of acceptable values
is usually 32 to 1024. For some devices, the range is modified by
settings of the device information file (INF).
If the selected port is USB or "None", then this setting cannot be set or
changed. For a slave device in Hydra connection, the value is displayed
but cannot be modified. In addition, the default value has been optimized
to allow for normal operation.
"Output Interval Time" edit field
Use this edit field for set the retry time to use when output fails. For
details of output interval time, please refer to the "5.8 Glossary" of this
