Version 2.65 Jul. 2009
45
User's Manual
Installer, SetupPOS, TMUSB
(4) The “Software License Agreement” dialog box is displayed.
To install the EPSON OPOS ADK, you must agree to the contents of the
displayed agreement. Read the contents and select “I accept the terms in
the License” if agreed with the Software License Agreement. After the
selection, the [Next] button becomes effective. Then, select the [Next]
button. If the Software License Agreement is not acceptable, select “I do
not accept the terms in the License Agreement”. Then, select the [Cancel]
button. Select the [Back] button to return to the previous dialog box.
(5) The “Information List” dialog box is displayed.
Information of the installed EPSON OPOS ADK is displayed. Confirm the
contents, and then select the [Next] button if the contents are acceptable.
(6) The “Select Registry File” dialog box is displayed.
Select “Not Use Registry File” when the REG file is not used. Then select
the [Next] button. Select “Use Registry File” to use the REG file. Enter the
full path REG file name after the text box is enabled. The default value is
“A:\OPOSDATA.reg”. Then, select the [Next] button. Press the [Browse]
button to specify the folder name that includes the REG file.
The REG file is a file for restoring information related to EPSON OPOS
ADK. Use the SetupPOS utility to create this file.
If an improper Registry File is selected, an error message will be displayed
and it will not be possible to go to the next dialog box. Follow the directions
of the error message and confirm that the Registry File is correct. When
the Registry File is set correctly, subsequent information can be referred
from the Registry File. When installing by overwriting, the Registry File
information will have priority over the installation information of the
previous installation.
Select the [Back] button to return to the previous dialog box.
(7) The "Select Installation Module" dialog box is displayed.
Select a module to be installed. Selectable modules are "Program Files",
"Samples", and "Manuals".
Installed modules cannot be selected.
After selecting a module, press the [Next] button. Press the [Back] button
to go back to the previous dialog box.
(8) The “Start Copying Files ” dialog box is displayed.
The dialog box shows the information, which has already been set.
