Epson C31C489111 - TM J7000P B/W Inkjet Printer User Manual Download Page 58

Page: 58 / 149

Version 2.65 Jul. 2009

User's Manual

Installer, SetupPOS, TMUSB

3.12.3. Message during Driver Installation after EPSON OPOS ADK Installation

Condition Error

Message

There is no driver supporting the OS
currently used.

The OS currently used is not supported.

The Installation transaction of the parallel
driver is failed.

Failed to the installation transaction of the
Parallel driver.

An error is returned during the installation
of the parallel driver.

The Installer of the Parallel driver returned an
error.

An unexpected error is returned during
the installation of the parallel driver.

An unexpected error is detected.

The update transaction of the parallel
driver is success.

To use the Parallel interface, the PC must be
restarted.
To restart now, remove the disk and click
"Yes".
To restart later, click "No".

3.12.4. Messages When the Silent Mode is specified

Condition Error

Message

An illegal value is specified for the Silent
Installation command line.

The form of the command line parameter is
illegal. Define it as follows.
setup /a“RegData.reg”

An inexistent registry file is specified in
the command line.

Registry File specified in the command line
parameter cannot be found.

The Silent mode’s log file cannot be
created.

Failed to make the silence log files.

The Silent Installer log file cannot be
opened.

Failed to open the Silent Installer log file.

A unsupported registry file is specified in
the parameter.

Registry file specified in the command line is
illegal.

Summary of Contents for C31C489111 - TM J7000P B/W Inkjet Printer






















































































































































Search results

Summary of Contents for C31C489111 - TM J7000P B/W Inkjet Printer

Reviews:

Related manuals for C31C489111 - TM J7000P B/W Inkjet Printer

Brands by name

Popular brands

Epson C31C489111 - TM J7000P B/W Inkjet Printer, User Manual

Search results

Summary of Contents for C31C489111 - TM J7000P B/W Inkjet Printer

Reviews:

Related manuals for C31C489111 - TM J7000P B/W Inkjet Printer

Brands by name

Popular brands