Version 2.65 Jul. 2009
76
User's Manual
Installer, SetupPOS, TMUSB
manual. The range of acceptable values is 0 to 9999. This setting is
valid for COM, LPT, USB, network, and wireless port.
If the selected port is "None", then this setting cannot be set or changed.
For a slave device in Hydra connection, the value is displayed but
cannot be modified. Also, the default value has been optimized to allow
for normal operation.
"Input SleepTime" edit field
This edit field supports only Version 1.xx devices.
Use this edit field to display or set the sleep time at the location where
API is processed, during input from the port. The range of acceptable
values is 0 to 99.
If the selected port is USB or "None", then this setting cannot be set or
changed. For a slave device in Hydra connection, the value is displayed
but cannot be modified. Also, the default value has been optimized to
allow for normal operation.
"Master device of the following device(Master device to:)” edit field
If the selected device is a master device connected to Hydra, then the
slave device is displayed; if the device is slave, then the master device is
displayed.
[ CheckHealth Interactive] button
Use this button to execute the CheckHealth method using Level =
OPOS_CH_INTERACTIVE for the device. If the port setting is "None",
then this button is disabled. For details, refer to the manual of the
device.
[Device Specific Settings] button
Use this button to display the ”Device Specific Settings” dialog box and
change the device specific settings for the selected device. If the
selected device does not support device specific settings, then this
button is disabled. For details, refer to the manual of the device.
[OK] button
Use this button to close the dialog box and save the device's
communication settings to the registry.
[Cancel] button
Use this button to cancel the changes and close the dialog box. Any
changes in the settings will not be saved to the registry.
