Version 2.65 Jul. 2009
139
User's Manual
Installer, SetupPOS, TMUSB
Section 6. EPSON TM USB Driver
The method for installing the USB driver with Windows 2000, Windows XP or Windows
Vista are explained below (note that installation in operating systems other than Windows
2000, Windows XP and Windows Vista are not supported.)
6.1. Installation
The method for installing the USB driver with Windows 2000, Windows XP or
Windows Vista are explained below (note that installation in operating
systems other than Windows 2000, Windows XP and Windows Vista are not
supported.)
When Windows 2000, Windows XP or Windows Vista is used, installation can be
done only by authorized users of the PC installation. Please request the
authorized users for help.
6.1.1. Windows 2000
(1) The “Add New Hardware” Wizard is displayed when the EPSON
UB-U01II/02II is detected.
(2) Select Search for the best driver for your device (recommended), then click
on the [Next] button.
(3) Select “Specify a location”.
(4) Specify the location in which the driver is located on the hard disk.
(5) When the driver is found, the conformation screen is displayed.
(6) After confirming as EPSON UB-U01II/02II, click on the [Next] button. Driver is
installed.
(7) After completed the installation of the driver, click on the [Finish] button to
complete the installation.
6.1.2. Windows XP
(1)
The “Found New Hardware” Wizard is displayed when the EPSON
UB-U01II/02II is detected.
(2) Click the [Next] button with Install from a list or specific (Advanced) selected.
(3) Select Search for the best driver in these locations for Search and installation
