Version 2.65 Jul. 2009
48
User's Manual
Installer, SetupPOS, TMUSB
”Full Path\Setup.exe” /s /a“a:\OposData.reg”
To specify the path of the recording file, use the "/f1" option.
(Example)
”Full Path\Setup.exe” /s /f1”c:\Temp\setup.iss” /a“a:\OposData.reg”
The functions are added to Silent Installation by adding the following
parameters to command lines.
The following parameters can be used at the same time. If you wish to use
them at once, input the parameter you want to use after the parameter added
to the command line.
Parameters do not distinguish capital and small letters. It is not necessary
specifying only with small letters as the following examples show.
<Making a recording file>
Adding Parameter: “ /r”
Example: ”Full Path\Setup.exe” /r
<Indicating the Silent Installation>
Adding Parameter: “ /s”
Example: ”Full Path\Setup.exe” /s /a“Full Path\OposData.reg”
<Specify the substitute recording file name and the path name>
Adding Parameter: “ /f1”
Example: ”Full Path\Setup.exe” /s /f1"C:\Temp\Setup.iss" /a“Full Path\
OposData.reg”
<Specify the substitute log file name and the path name>
Adding Parameter: “ /f2”
Example: ”Full Path\Setup.exe” /s /f2"C:\Temp\Setup.iss" /a“Full Path\
OposData.reg”
<Indicating that adds the registry >
Adding Parameter: “ /a”
Example: ”Full Path\Setup.exe” /s /a“Full Path\OposData.reg”
<Rebooting after the Silent Installation>
Adding Parameter: “ /n”
Example: ”Full Path\Setup.exe” /s /a“Full Path\OposData.reg” /n
