84
EN109-1665751-44
11.3 Technical maintenance
We would advise you to have the device examined on an annual basis.
The check and/or maintenance must take place in accordance with the procedure described in the service
manual for the equipment. This may be carried out by your supplier or by another party authorised by the
manufacturer. It is also advisable to keep a record of all the maintenance activities which have been performed.
In some countries, this is even compulsory.
Maintenance and repairs may only be carried out by an authorised party.
The manufacturer shall not be liable for the consequences of maintenance or repairs carried out by
unauthorised parties.
The device may not be opened by unauthorised parties; this will cause the guarantee to lapse.
11.3.1
Alignment of the running surface
If the treadmill has been set up correctly (see 6.1 Installation) and the band still runs out of alignment, you will
need to contact the supplier of the treadmill.
Users who have been instructed in the alignment of the running surface by a party authorised by the
manufacturer may in this case adjust the band at their own risk.
11.4 Expected service life
This device will remain suitable for its intended use as long as it is subjected to yearly maintenance by a
qualified service engineer as described in the service manual.
The service engineer will decide whether the device is suitable for use according to the specifications.
11.5 End of service life
Your EN-Motion and accessories contain materials which can be reused and materials which are harmful to the
environment. When it comes to disposing of the device and accessories at the end of their service life,
specialist companies can dismantle these articles in order to remove the harmful materials and the reusable
materials. This allows you to contribute to a better environment.
12 Troubleshooting
Should your EN-Motion treadmill develop a fault, please contact the supplier of the device or Enraf-Nonius B.V.
(the Netherlands). Repairs and installations should only be carried out by a service technician who has been
authorised by Enraf-Nonius.
12.1 LEDs and/or displays fail to illuminate
•
Ensure that the plug is properly inserted into the wall socket.
•
Check that the wall socket is working.
•
Check/replace the safety fuses in the power input.
•
Check the clarity setting of the LED screen.
12.2 Error code on the display
The EN-MOTION has an internal check which means that it is self-monitoring. Should an error code appear on
the display, you will need to contact the supplier of the device.
12.3 Motor overload/overheating
The inclination motors have a thermal safety feature.
This will kick in if the angle of inclination is increased or decreased very frequently in a short period of time.
You will then need to wait until the motor has cooled down sufficiently before using the treadmill again.
Under normal circumstances and with normal use, the thermal safety feature will almost never kick in.
Please enquire as to the local rules for the disposal of the device and accessories.
